Connect with us

Android Repair

A20 charging Paused Battery Temperature too low – Samsung a20 battery temperature is too low

Published

on

A20 charging Paused Battery Temperature too low

Samsung a20 battery temperature is too low charging Problem

Samsung A20 (SM-205f) Battery temperature too high/low- Fixed 100%.  A20 charging Paused We are facing a lot of problems lately with your charging on Samsung A20 (SM-205f)  model phones.

A20 charging Paused Battery Temperature too low 100% Working

No one understands how it will solve the problem and can be done. The problem is a little understandable but if you don’t understand the work then it is very difficult to understand what we should do in that case and how we will get out of this problem and how to make our phone work as well as before.

I don’t know why this problem comes before a20 battery temperature is too low

A20 charging Paused Battery Temperature too high/low- Fixed 100% Why?

  1. This problem mainly comes when a small amount of water enters your phone, but the problem comes.
  2. This is why this problem occurs when your phone falls into the water.
  3. This problem is due to the fact that you have a problem if you have a fall in your hand or if you have to walk out of your pocket in any way.
  4. This problem is because if there is a small child in your room when the child does not have the phone in his mouth then you do not realize that the lava from his mouth has gone inside the phone that is why your phone has a charging problem.
  5. So let’s find out how you can solve this problem. I am giving you the JPG diagram in this post. The thing that you will see through its picture will do your job but you will get success.
  6. The picture will show you which registers you will remove. There are two registers in this picture. You will see that the picture is clearly given in that picture. Clearly, when you remove that register bow from your PCB, you will be successful.

 

A20 charging Paused Battery Temperature too low - Samsung a20 battery temperature is too low

A20 charging Paused Battery Temperature too low – Samsung a20 battery temperature is too low

If you find the work useful, you can comment and share it with others so that others can understand and do it more easily and if you need anything, you can let us know in the comments. Thank you all.

 3,018 total views,  3 views today

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Android Repair

Redmi Note 4 and Note 4X Touch does not work

Published

on

redmi-note-4x-touch-not-working-2020

How are you friends? I hope everyone is well. Today I am going to share with you a very important thing that many of you do not know, many do not understand that this post is for them I wrote today.

There are problems with Redmi Note 4 and Note 4X and any other phone such as Touch does not work. Touch on mobile is working. Suddenly your touch is OK but suddenly it is not working.

But in the end, how do you do it? You need to understand the right size and the right line. I won’t tell you today why your phone’s touch doesn’t work. The only reason is a problem that you can’t understand. Today I will explain to you who will do what and how to do your job.

A common problem is that Touch doesn’t work. You need to understand why it doesn’t work. Your problem is due to a low online cut.

You will see that there are five points on the side of the motherboard. There are five points in the motherboard. You think it is called TP. There are four points in it. You have four connections and one has no connection. There will be a ground for you to stay in that case is huge because there are a lot of problems.

What do you do in case a line becomes 2.8 voltage sewing short ?

Then you will do a job to remove the fingerprint on your mobile.

If the vowel goes off, you know there is a problem with your fingerprint. Change your fingerprint or measure those lines.

What to do if it is not solved ?

Then you have a TP point next to the touch connector of your mobile. In the book you see there is a register attached to it. By removing the register, you will check the amount of benus as well as whether it is short on one side and on the left side. If you remove it, you will see the value of 10. If you are honest, you will cut that line and find a line in which a capacitor or resistor of 2.8 voltage will be found in it. Bring it from there and connect that point in your ear. Inshallah

 

redmi note 4x-touch-not-working-jumpiar-ok

redmi note 4x-touch-not-working-jumpiar-ok

 2,965 total views,  1 views today

Continue Reading

Trending